|
|
Post by AnthroHeart on Sept 15, 2022 12:07:27 GMT
Can we copy and paste into the intention repeater max window? I can't do it with ctrl+c and ctrl+v. Can this feature be added? Yes, right clicking will paste into the terminal window on Windows. |
|
|
|
Post by ceildric on Sept 17, 2022 9:10:41 GMT
Suppose I have some audio files with subliminal messages embedded, or with some kind of energy attached (not talking strictly morphic fields). Is there a command I can give the intention repeater that would activate these files and repeat any embedded subliminals / affirmations as if I were listening to the original files themselves?
That is to say, I would not have a playlist running, but just have the files in a folder, and the repeater would be instructed as to which files I wish to have "played".
I appreciate you're making these technologies available publically.
|
|
|
|
Post by reden on Sept 17, 2022 10:46:56 GMT
Suppose I have some audio files with subliminal messages embedded, or with some kind of energy attached (not talking strictly morphic fields). Is there a command I can give the intention repeater that would activate these files and repeat any embedded subliminals / affirmations as if I were listening to the original files themselves? That is to say, I would not have a playlist running, but just have the files in a folder, and the repeater would be instructed as to which files I wish to have "played". I appreciate you're making these technologies available publically. PLAY 1X SPEED name_of_file ON/AT ME AMPLIFY RESULTS BY INFINITY INFINITE SPEED OF RESULTS WITH RESONANCE FIELD AND INFINITE SOURCE AND STRONGEST MULTIVERSE ENERGY Nowadays you could do: WITH SOURCE PLAY PERFECT MAXIMUM SPEED name_of_file ON/AT ME AMPLIFY RESULTS BY INFINITY INFINITE SPEED OF RESULTS WITH RESONANCE FIELD AND INFINITE SOURCE AND STRONGEST MULTIVERSE ENERGY REPEAT INDEFINITELY THANKS^OPTIMAL The original one, by yinyang, was something like: Play 1x speed name_of_file Amplify results by 1000x |
|
|
|
Post by ceildric on Sept 17, 2022 13:17:06 GMT
Suppose I have some audio files with subliminal messages embedded, or with some kind of energy attached (not talking strictly morphic fields). Is there a command I can give the intention repeater that would activate these files and repeat any embedded subliminals / affirmations as if I were listening to the original files themselves? That is to say, I would not have a playlist running, but just have the files in a folder, and the repeater would be instructed as to which files I wish to have "played". I appreciate you're making these technologies available publically. PLAY 1X SPEED name_of_file ON/AT ME AMPLIFY RESULTS BY INFINITY INFINITE SPEED OF RESULTS WITH RESONANCE FIELD AND INFINITE SOURCE AND STRONGEST MULTIVERSE ENERGY Nowadays you could do: WITH SOURCE PLAY PERFECT MAXIMUM SPEED name_of_file ON/AT ME AMPLIFY RESULTS BY INFINITY INFINITE SPEED OF RESULTS WITH RESONANCE FIELD AND INFINITE SOURCE AND STRONGEST MULTIVERSE ENERGY REPEAT INDEFINITELY THANKS^OPTIMAL The original one, by yinyang, was something like: Play 1x speed name_of_file Amplify results by 1000x Thanks very much. |
|
|
|
Post by reden on Jan 1, 2023 4:41:04 GMT
Happy New Year.
The forum is now 2 years old. Our journey has been amazing, and there are many achievements to come.
|
|
|
|
Post by AnthroHeart on Jan 1, 2023 12:20:06 GMT
Happy New Years.
|
|
igp
New Member
Posts: 3
|
Post by igp on Nov 5, 2023 11:13:21 GMT
Hello, thank you for making Intention Repeater and this forum. Do I need to keep screen on if the repeater process itself is running steadily? For example closing the lid of a laptop for overnight running.
|
|
|
|
Post by AnthroHeart on Nov 5, 2023 14:23:30 GMT
Hello, thank you for making Intention Repeater and this forum. Do I need to keep screen on if the repeater process itself is running steadily? For example closing the lid of a laptop for overnight running. Yes you can close the lid. I have an external monitor, and leave my laptop closed. But you don't need an external monitor.
|
|
|
|
Post by reden on Nov 6, 2023 12:46:52 GMT
Hello, thank you for making Intention Repeater and this forum. Do I need to keep screen on if the repeater process itself is running steadily? For example closing the lid of a laptop for overnight running. Yes you can close the lid. I have an external monitor, and leave my laptop closed. But you don't need an external monitor.
Whether leaving the lid shut works depends on the laptop. MacBooks will suspend unless the charger is connected, by default. |
|
|
|
Post by AnthroHeart on Nov 17, 2023 13:15:24 GMT
Yes you can close the lid. I have an external monitor, and leave my laptop closed. But you don't need an external monitor.
Whether leaving the lid shut works depends on the laptop. MacBooks will suspend unless the charger is connected, by default. Yeah Windows will suspend by default too. You have to change settings for it to remain on with lid closed. |
|
beanlord
New Member
Posts: 33
Member is Online
|
Post by beanlord on Nov 23, 2023 14:38:49 GMT
where exactly am i supposed to run the command !gbdown --id? You can insert it as code right below the one that says: !gdown --id 1Iy1e6nrpYKUhfIVrABt9E0_IX2xAUmvh
Or anywhere before the actual run statement. If you move the mouse below each section of code, you'll see a dialogue that appears that says: + Code You can use that to insert a code block.
Is it possible to make an small tutorial available for this? I'm on Google Colab trying to follow the steps but I'm clueless about python and programming so I honestly do not know how to make this work even after reading several times the instructions. I understood the whole thing until !gbdown --id but I got lost about where to put it or how it's connected with intention repeater. |
|
|
|
Post by AnthroHeart on Nov 23, 2023 17:47:03 GMT
You can insert it as code right below the one that says: !gdown --id 1Iy1e6nrpYKUhfIVrABt9E0_IX2xAUmvh
Or anywhere before the actual run statement. If you move the mouse below each section of code, you'll see a dialogue that appears that says: + Code You can use that to insert a code block.
Is it possible to make an small tutorial available for this? I'm on Google Colab trying to follow the steps but I'm clueless about python and programming so I honestly do not know how to make this work even after reading several times the instructions. I understood the whole thing until !gbdown --id but I got lost about where to put it or how it's connected with intention repeater. I have instructions on running colab here: www.youtube.com/watch?v=3kFNMIuEc3c |
|
beanlord
New Member
Posts: 33
Member is Online
|
Post by beanlord on Nov 23, 2023 20:08:20 GMT
x
|
|
beanlord
New Member
Posts: 33
Member is Online
|
Post by beanlord on Nov 23, 2023 20:08:50 GMT
Is it possible to make an small tutorial available for this? I'm on Google Colab trying to follow the steps but I'm clueless about python and programming so I honestly do not know how to make this work even after reading several times the instructions. I understood the whole thing until !gbdown --id but I got lost about where to put it or how it's connected with intention repeater. I have instructions on running colab here: www.youtube.com/watch?v=3kFNMIuEc3cThank you for your help. |
|
beanlord
New Member
Posts: 33
Member is Online
|
Post by beanlord on Jan 20, 2024 16:51:50 GMT
Is it possible to make an small tutorial available for this? I'm on Google Colab trying to follow the steps but I'm clueless about python and programming so I honestly do not know how to make this work even after reading several times the instructions. I understood the whole thing until !gbdown --id but I got lost about where to put it or how it's connected with intention repeater. I have instructions on running colab here: www.youtube.com/watch?v=3kFNMIuEc3cI'm getting: "cc1plus: fatal error: intention_repeater_max_cuda.cu: No such file or directory" After playing "!nvcc intention_repeater_max_cuda.cu -O3 -o intention_repeater_max_cuda" Any idea why this is happening? |
|
